The Airgun regulator with simple installation without adjustments on rifle, so everything can be returned back. All you need to do is unscrew the valve body from bottle (before screwing launch air). You need suitable stick and vise. Then screw regulator between the bottle and valve. Regulator with vented to atmosphere.

Product Details

The position of the manometer and quick fill pin can be selected before pressurizing. To fulfill the need to purchase painball coupling , which is the same as marauder or other rifle. After installing the regulator NEVER fill the old way, through the valve. At fill always open the valve bottle slowly and do not fill too quickly. After installing the regulator NEVER fill throught by valve on the airgun, only by quick fill on regulator. For the filling you must purchase paintball coupling, which is the same as gun marauder or more.

The tread adapter of cricket valve is made of stainless steel,which is the most precise part of whole valve and it will malfunction if there is an error. So we use a five-axis CNC to make it. To ensure the correctness of its size. At the same time, the roughness of the inner hole is also very important. You can imagine that the piston constantly reciprocates the inner wall of the valve under great pressure. If it is not handled properly, it will malfunction soon. Your valve will not be available. However,our products will not have such problems. Every product is processed by mirror surface treatment and filled with flame retardant grease. Friction is minimized during movement.

The stop ring is a creative part. Our team invented it in 2009 to solve the problem that the original fixing ring of air force air gun will fall off during use due to design defects. All our cricket products will be equipped with it. You don't need to buy it separately.

We offer a variety of replaceable Air Fill Nipple to meet the different requirements of the initial speed of muzzle for different players. We offer tools for replacing the Air Fill Nipple for free, you can use it when you need it.

Graphs for Output pressure 135bar .22 weight 18.1grain

Result in air gun AirForce Condor

You must keep maximum cleanness in the entire pressure system (airtube and outer o-rings). Do not disassemble the regulator without previous approval, which will be awarded based on e-mail correspondence, where you provide the reason why it would be necessary to disassemble the regulator. In the case of breach this procedure you may damage the regulator function (fully assembled regulator is not simple and it is necessary to follow the correct procedure). For these reasons, the disassembly without previous consent,or failure exact installation procedure can not claim the warranty. Since regulator is not original part from the manufacturer’s, installation is on your own responsibility.